Publications

View Publications in Google Scholar 

Publications:

44. Weisbord, M. Barzilay, R. Cai, E. Welter, A.i Kuzmin, A. Anspoks, and T. Segal-Peretz. ” The Development and Atomic Structure of Zinc Oxide Crystals Grown within Polymers from Vapor Phase Precursors”. ACS Nano, 2024

43. R. Cai, I. Weisbord, S. Caspi, L. Naamat, L. Kornblum, A. Grinberg Dana, and T. Segal-Peretz. “Rational Design and Fabrication of Block Copolymer Templated Hafnium Oxide Nanostructures”. ACS Chem. Mater. 2024
42. B. C. Welch, E. N. Antonio, T. P. Chaney, O. M. McIntee, J. Strzalka, V. M. Bright, A. R. Greenberg, T. Segal-Peretz, M. Toney, and S. M. George. “Building Semipermeable Films One Monomer at a Time: Structural Advantages via Molecular Layer Deposition vs Interfacial Polymerization”. ACS Chem. Mater. 2024
41. J. P. Jahnke, , D. Kim, D. J. Wildemuth, J. Nolla, M. W. Berkow, H. Gwak, S. Neyshtadt, T. Segal-Peretz, G. L. Frey, and B. F. Chmelka. “Mesostructured Materials with Controllable Long-Range Orientational Ordering and Anisotropic Properties.” Advanced Materials, 2023

40. S. Keren, C. Bukowski, M. Barzilay, M. Kim, M. Stolov, A. J. Crosby, N. Cohen, and T. Segal-Peretz. “Mechanical Behavior of Hybrid Thin Films Fabricated by Sequential Infiltration Synthesis in Water-Rich Environment”. ACS Appl. Mater. Interfaces,2023

39. S. Keren, T. Segal-Peretz, and N. Cohen.  “Exploiting perforations to enhance the adhesion of 3D-printed lap shears”. Theoretical and Applied Fracture Mechanics, 2023

38. I. Weisbord and T. Segal-Peretz. “Revealing the 3D Structure of Block Copolymers with Electron Microscopy: Current Status and Future Directions”. ACS Applied Materials and Interfaces, 2023

37. A. Simon, Z. Zhang, C. Abetz, V. Abetz, and T. Segal-Peretz. “Atomic layer deposition enables multi-modal three-dimensional electron microscopy of isoporous membranes”. Nanoscale 2023

36. W. Shan, I. Weisbord, X. Feng, J. Hyon, G.M. Manesi, A. Avgeropoulos, T. Segal-Peretz, and E. L. Thomas. “Layered Thin Film Deposition via Extreme Inter-Brush Slip in a Lamellar Block Copolymer”. Macromolecules 2022

35. S. Das, M. G. O’Connell, H. Xu, R. Bernstein, J. Kim, K. Sankhala, T. Segal-Peretz, R. Shevate, W. Zhang, X. Zhou, S. B. Darling, and J. B. Dunn. “Assessing Advances in Anti-fouling Membranes to Improve Process Economics and Sustainability of Water Treatment.” ACS EST Engg. 2022

34. R. Azoulay, M. Barzilay, I. Weisbord, R. Avrahami, E. Zussman, and T. Segal-Peretz. “Sequential Infiltration Synthesis for High-Precision Fabrication of Applied Ceramic Fibers with Designed Nanostructures─Nanowires, Nanobelts, and Core–Shell Fibers.” ACS Appl. Nano Mater. 2022

33. N. Shomrat, K. Chirko, I. Weisbord, Y. Avniel, S. Khirsto, D. Nessim, A. Litman and T. Segal-Peretz. “Development and evaluation of three-dimensional metrology of nanopatterns using electron microscopy.” J. of Micro/Nanopatterning, Materials, and Metrology (2022)

32. Z. Zhang and A. Simon, C. Abetz, M. Held, A.-L. Höhme, E. S. Schneider, T. Segal-Peretz and V. Abetz. “Hybrid Organic–Inorganic–Organic Isoporous Membranes with Tunable Pore Sizes and Functionalities for Molecular Separation.” Advanced Materials (2021).

31. F. Barrows, H. Arava, C. Zhou, P. Nealey, T. Segal-Peretz, Y. Liu, S. Bakaul, C. Phatak, and A. Petford-Long. “Mesoscale Confinement Effects and Emergent Quantum Interference in Titania Antidot Thin Films.” ACS nano (2021).

30. B. K. Barick, N. Shomrat, U. Green, Z. Katzman, and T. Segal-Peretz. “Fabrication of Nanoscale Oxide Textured Surfaces on Polymers.” Polymers 13, no. 13 (2021): 2209.

29. T. Itzhak, N. Segev-Mark, A. Simon, V. Abetz, G. Z. Ramon, and T. Segal-Peretz. “Atomic Layer Deposition for Gradient Surface Modification and Controlled Hydrophilization of Ultrafiltration Polymer Membranes.” ACS Applied Materials & Interfaces (2021).

28. Z. Golany, I. Weisbord, M. Abo-Jabal, O. Manor and T. Segal-Peretz. “Polymer dewetting
in solvent-non-solvent environment- new insights on dynamics and lithography-free patterning”. Journal of Colloid and Interface Science (2021).

27. L. Rovinsky, B. Kumar Barick, E. Lieberman, E. Shawat Avraham, G. Daniel Nessim, T. Segal-Peretz, and N. Lachman. “Alumina Thin-Film Deposition on Rough Topographies Comprising Vertically Aligned Carbon Nanotubes: Implications for Membranes, Sensors, and Electrodes.” ACS Applied Nano Materials (2020).

26. A. Levitsky, G. M. Matrone, A. Khirbat, I. Bargigia, X. Chu, O. Nahor, T. Segal‐Peretz et al. Toward Fast Screening of Organic Solar Cell Blends. Advanced Science (2020).

25. J. Ren, T. Segal-Peretz, C. Zhou, G. S. W. Craig and P. F. Nealey. Three-dimensional superlattice engineering with block copolymer epitaxy. Science Advances (2020).

24. I. Weisbord, N. Shomrat, R. Azoulay, A. Kaushansky, and T. Segal-Peretz. Understanding and Controlling Polymer-Organometallic Precursor Interactions in Sequential Infiltration Synthesis. Chemistry of Materials (2020).

23. R. Azoulay, N. Shomrat, I. Weisbord, G. Atiya, and T. Segal‐Peretz. Metal Oxide Heterostructure Array via Spatially Controlled–Growth within Block Copolymer Templates. Small (2019).

22. B. K. Barick, A. Simon, I. Weisbord, N. Shomrat, T. Segal-Peretz. Tin Oxide Nanostructure Fabrication via Sequential Infiltration Synthesis in Block Copolymer Thin Films. Journal of Colloid and Interface Science. 2019.

21. C. Khoury, S. Pappuru, N. Gavriely, O. Kleinerman, D. Shpasser, T. Segal-Peretz, O. M. Gazit. Cooperatively Catalyzed Henry Reaction through Directed Metal‐Chitosan Interactions. ChemNanoMat. 2019.

20. I. Weisbord , N. Shomrat, H. Moshe, A. Sosnik, T. Segal-Peretz. Nano spray-dried block copolymer nanoparticles and their transformation into hybrid and inorganic nanoparticles. Advanced Functional Materials. 2019.

https://ars.els-cdn.com/content/image/1-s2.0-S0021979718309640-ga1_lrg.jpg

19. A. Pandey , M. Derakhshandeh, S.A. Kedzior, B. Pilapil, N. Shomrat, T. Segal-Peretz, S.L. Bryant, M. Trifkovic. Role of interparticle interactions on microstructural and rheological properties of cellulose nanocrystal stabilized emulsions. Journal of Colloid and Interface Science. 2018.

18. J. Ren, C. Zhou, X. Chen, M. Dolejsi, G. Craig, P. Delgadillo, T. Segal-Peretz, and P. F. Nealey, Engineering the Kinetics of Directed Self-Assembly of Block Copolymers Toward Fast and Defect-Free Assembly, ACS Applied Materials and Interfaces, 2018, 10, 23414.

17. G. Khira, M. Doxastakis, A. Bowen, J. Ren, H. S. Suh, T. Segal-Peretz, X. Chen, C. Zhou, A. F. Hannon, N. J. Ferrier, V. Vishwanath, D. F. Sunday. R. Gronheid, R. J. Kline, J. J. de Pablo, P. F. Nealey, Derivation of multiple covarying material and process parameters using physics-based modeling of x-ray data, Macromolecules, 2017, 50, 7783.

adfm201701756-fig-0001

16. C. Zhou, T. Segal-Peretz, M. E.Oruc, H. S. Suh, G. Wu, P. F. Nealey, Fabrication of nanoporous alumina ultrafiltration membrane with tunable pore size using block copolymer templates, Advanced Functional Materials, 2017, 1701756.

TOC Interconnected ionic domains enhance conductivity in microphase separated block copolymer electrolytes

15. C. G. Arges, Y. Kambe, M. Dolejsi, G. Wu, T. Segal-Peretz, J. Ren, C. Cao, J. Kline, P. F. Nealey, Interconnected ionic domains enhance conductivity in microphase separated block copolymer electrolytes, Journal of Material Chemistry A, 2017, 5, 5619-5629.

TOC Quantitative three dimensional characterization of block copolymer directed self -assembly on combined chemical and topographical pre-patterned templates

14. T. Segal-Peretz, J. Ren, S. Xiong, G. Khaira, A. Bowen, L. E. Ocola, R. Divan, M. Doxastakis, N. J. Ferrier, J. de Pablo, P. F. Nealey, Quantitative three dimensional characterization of block copolymer directed self -assembly on combined chemical and topographical pre-patterned templates, ACS Nano, 2017, 11, 1307-1319.

13. J. Ren, L. E. Ocola, R. Divan, D. A. Czaplewski, T. Segal-Peretz, S. Xiong, R. J. Kline, C. G. Arges, P. F. Nealey, Post-directed-self-assembly membrane fabrication for in-situ analysis of block copolymer structures, Nanotechnology, 2016, 27 (43), 435303.

12. T. Segal-Peretz, C. Zhou, J. Ren, T. Dazai, L. E. Ocola, R. Divan, P. F. Nealey, Three dimensional assembly in directed self-assembly of block copolymers, J. Photopolym. Sci. Technol., 2016, 29 (5), 653-657.

paper 4

11. S. Hur, V. Thapar, A. Ramirez-Hernandez, G. S. Khaira, T. Segal-Peretz, P. A. Rincon Delgadillo, M. Muller, P. F. Nealey, J. J. de Pablo, Molecular Pathways to Defect Annihilation in Directed Self-Assembly, Proceeding of the National Academy of Science, 2015, 112 (46), 14144-14149.

TOC Deciphering the three-dimensional structure of block copolymers via sequential infiltration synthesis and scanning transmission electron tomography

10. T. Segal-Peretz, J. Winterstein, M. Doxastakis, A. Ramirez-Hernandez, M. Biswas, J. Ren, H. S. Suh, S. B. Darling, J. A. Liddle, J. W. Elam, J. J. de Pablo, N. Zaluzec, and P. F. Nealey, Characterizing the three-dimensional structure of block copolymers via sequential infiltration synthesis and scanning transmission electron tomography, ACS Nano, 2015, 9 (5), 5333-5347.

9. T. Segal-Peretz, O. Sorias, M. Moshonov, I. Deckman, M. Orenstein, and G. L. Frey, Plasmonic nanoparticle incorporation into inverted hybrid organic-inorganic solar cells, Organic Electronics, 2015, 23, 144-150.

TOC Understanding and promoting molecular interactions and charge transfer in dye-mediated hybrid photovoltaic materials

8. T. Segal-Peretz, J. P. Jahnke, A. Berenson, L. Neeman, D. Oron, A. J. Rossini, B. F. Chmelka, and G. L. Frey, Understanding and promoting molecular interactions and charge transfer in dye-mediated hybrid photovoltaic materials, Journal of Physical Chemistry C, 2014, 118 (44), 25374-25391.

TOC Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics

7. S. Obuchovsky, I. Deckman, M. Moshonov, T. Segal-Peretz, G. Ankonina, T. J. Savenije, and G. L. Frey, Atomic layer deposition of zinc oxide onto and into P3HT for hybrid photovoltaics, Journal of Materials Chemistry C, 2014, 2 (42), 8903-8910.

image file: c3tc32246g-f5.tif

6. O. Nahor, T. Segal-Peretz, L. Neeman, D. Oron, and G. L. Frey, Controlling morphology and charge transfer in ZnO/polythiophene photovoltaic films, Journal of Materials Chemistry C, 2014, 2 (21), 4157-4176.

TOC Control over in-channel mesostructure orientation through AAM surface modifications

5. A. Keller, T. Segal-Peretz, and G. L. Frey, Control over in-channel mesostructure orientation through AAM surface modifications, Physical Chemistry Chemical Physics, 2013, 15 (32), 13637-13645.

TOC On the origin of charge generation in hybrid TiOx_conjugated polymer photovoltaic devices

4. T. Segal-Peretz, O. Leman, A. M. Nardes and G. L. Frey, On the origin of charge generation in hybrid TiOx/conjugated polymer photovoltaic devices, Journal of Physical Chemistry C, 116 (2), 2012, 2024-2032.

TOC Mesostructured Silica Containing Conjugated Polymers Formed within the Channels of Anodic Alumina Membranes from Tetrahydrofuran-Based Solution

3. A. Keller, S. Kirmayer, T. Segal-Peretz, and G. L. Frey, Mesostructured Silica Containing Conjugated Polymers Formed within the Channels of Anodic Alumina Membranes from Tetrahydrofuran-Based Solution, Langmuir, 2012, 28 (2), 1506-1514.

TOC Understanding and controlling organic_inorganic interfaces in mesostructured hybrid photovoltaic materials

2. S. Neyshtadt, J. P. Jahnke, T. Segal-Peretz, A. Rawal, D. Huppert, B. F. Chmelka, and G. L. Frey, Understanding and controlling organic/inorganic interfaces in mesostructured hybrid photovoltaic materials, Journal of the American Chemical Society, 2011, 133 (26), 10119-10133.

TOC Facile infiltration of semiconducting polymer into mesoporous electrodes for polymer-oxide solar cells

1. A. Abrusci, I.K. Ding, M. Al-Hashimi, T. Segal-Peretz, M. D. McGehee, M. Heneey, G. L. Frey and H. J. Snaith, Facile infiltration of semiconducting polymer into mesoporous electrodes for polymer-oxide solar cells, Energy & Environmental Science, 2011, 4 (8), 3051-3058.

Books and/or Chapters in books:

1. R. Seidel, L. Williamson, T. Segal-Peretz, G. Wu, H. S. Suh, C. Zhou, S. Xiong, G. S. W. Craig, and P. F. Nealey, Directed self-oriented self-assembly of block copolymers using chemically modified surfaces, edited by R. Gronheid, and P. F. Nealey, Directed Self-assembly of Block Co-polymers for Nano-manufacturing, Woodhead Publishing, 2015, p. 129-170.

Refereed papers in conference proceedings:

00064_PSISDG10584_105840K_page_2_1.jpg

6. C. Zhou; T. Kurosawa; T. Dazai; J. Doise; J. Ren; C. Bezik; T. Segal-Peretz; A. Yamazaki; R. Gronheid; P. Rincon-Delgadillo; J. de Pablo; P. F. Nealey, Studying the effects of chemistry and geometry on DSA hole-shrink process in three dimensions, Proc. of SPIE, SPIE advanced lithography, 10584, 10584K, Feb 2018, San Jose, USA.

honeycomb_networks_of_metal_oxides_from_selfassembling_pspmma_block_copolymers

5. F. Barrows, P. F. Nealey, T. Segal-Peretz, L. Stan, J. Elam, A. Manil, E. Porath, C. Phatak, A. Petford-Long, Honeycomb networks of metal oxides from self-assembling PS-PMMA block copolymers, Microscopy & Microanalysis, 23, 1654, August 2017, St. Louis, USA.

4. C. G. Arges, Y. Kambe, M. Dolejsi, G. Wu, T. Segal-Peretz, J. Ren, P. F. Nealey, Realizing the potential of micro-phase separated block copolymer electrolytes: ion domain connectivity plays a prominent role in ion conduction., ECS Transactions, ECS, 75 (14) 1013-1020, October 2016, Honolulu, USA.

An external file that holds a picture, illustration, etc. Object name is nihms847926f1.jpg

3. J. W. Elam, M. Biswas, S. B. Darling, A. Yanguas-Gila, J. D. Emery, A. Martinson, P. F. Nealey, T. Segal-Peretz, Q. Peng, J. Winterstein, J. A. Liddle, Y. C. Tseng, New Insights into Sequential Infiltration Synthesis, ECS Transactions, ECS, 69 (7) 147-157, October 2015, Phoenix, USA.

2. T. Segal-Peretz, J. Winterstein, M. Biswas, J. A. Liddle, J. W. Elam, N. Zaluzec, and P. F. Nealey, Staining Block Copolymers using Sequential Infiltration Synthesis for High Contrast Imaging and STEM tomography, Microscopy & Microanalysis, M&M, 21, 611, August 2015, Portland, USA.

figure 6 web

1. T. Segal-Peretz, J. Winterstein, J. Ren, M. Biswas, J. A. Liddle, L. E. Ocola, R. N. S. Divan, J. W. Elam, N. Zaluzec, and P. F. Nealey, Metrology of DSA process using TEM tomography, Proc. of SPIE, 2015, 9424, 942401U-1.